SigmaGate Troubleshooting Guides
- SigmaGate Troubleshooting
- 1. Check that there is power to the gate
- 2. Check the motor key switch is turned on
- 3. MPB light illuminated on main pcb
- 4. If the gates are equipped with Mechanical Panic Breakout, check that the gates are manually returned to its zero position (locked position)
- 5. Check if the gates are being held open on the remote controls. Check that CLEANING MODE is not activated by checking for the illuminated Cleaning LED on the main PCB
- 6. Check connections of GateCOM cross-over cable by checking for the illuminated Saloon LED on the main PCB
- 7. Check that all 4 PEC sensors are aligned and centered on reflector using the indicator lights on each PEC sensor
- 8. Press red test button on gatemaster of the master gate
- 9. Press black test button on the main PCB on each gate
- 10. Bypass Entrapment board
- 11. Check dipswitch settings
- 12. Check coulisse pcb
- 13. Check cable chain assembly
- 14. Check potentiometer settings