SigmaGate - Troubleshooting
- Quick access to troubleshooting guides below. Click here for all available information.
- 00. Check the main PCB, any LED diodes that is/isn't active
- 01. Check that there is power to the gate
- 02. Check that the motor key switch is turned on
- 03. If the gates are equipped with Mechanical Panic Breakout, check that the gates are manually returned to its zero position (locked position)
- 04. Check if the gates are being held open on the remote controls. Check that CLEANING MODE is not activated by checking for the illuminated Cleaning LED on the main PCB